FPBA-01 ABB PROFIBUS DP adapter module

Prior to the installation of the Allen-Bradley 2094-BM02-S multi-axis servo drive, clearances should be made around the top and the bottom of the drive in order to allow proper airflow. This is important in order to guarantee smooth operations and prevent overheating. Its installation cabinet depth must be a minimum of 10.7 inches. If the drive is going to be installed in a cabinet, this cabinet should be tall enough to fit the drive and enable it to have a ventilation mechanism from an external cooling system.

If the Allen-Bradley 2094-BM02-S multi-axis servo drive is going to be installed in an enclosure, its unshielded cables must be kept as short as possible and the shunt power cables must be separated from sensitive cables. The Allen-Bradley 2094-BM02-S multi-axis servo drive must be used with circuit protection. The use of a circuit breaker or a fuse might help to maintain the drive in good condition since it prevents the occurrence of short circuit. In the event of fault, the power-transistor control signal is disabled, removing motor torque without shutting down the entire 2094-BM02-S drive. This reduces production and energy waste and minimizes downtime. Once the Allen-Bradley 2094-BM02-S multi-axis servo drive has been programmed, it must be tested multiple times in order to ensure that it has the correct and proper configuration and to guarantee that the programming process has been achieved successfully.