DS200TCQCG1AJD RST Overflow Board

The GE RST Overflow Board DS200TCQCG1AHD is populated with 24 jumpers and 3 40-pin connectors. It also has 3 34-pin connectors and 1 16-pin connector. The ID assigned to the 16-pin connector is JC. The IDs assigned to the 40-pin connectors are JFF, JE, and 6PL. The 24 jumpers on the GE RST Overflow Board DS200TCQCG1AHD play an important role in the configuration of the board. The jumpers have two positions on which the installer can set the jumpers. Depending on the selection, the board will process information differently. The jumpers are defined as 3 pin jumpers. That is, the jumper can cover pins 1 and 2 or pins 2 and 3. The jumper makes an electrical contact between the two pins it covers. Some of the jumpers are not set by the installer but are used by the factory during product testing. In that case, one position is for use by the manufacturer and the other is for use during normal operations.

The jumpers are set before the board is installed in the drive and require the information supplied by the installation manual to understand the available configuration options. Normally the engineers and management of the installation site confer with the installer. From that communication, the installer knows how the engineers want to set the jumpers.

To set the jumpers, arrange the board on a clean, dry, and sturdy work space and place a static protective material under the board. This might be the static protective bag the board was shipped in.

DS200TCQCG1BKG