CC-TAIX51  CC-TAIX01 CC-TAIX11  Analog Input IOTA Models

The AI IOM/IOTA is optimized for use with classic two-wire transmitters. All 16 channels can accept inputs
from two-wire transmitters without any special wiring or jumper options.
The standard usage is to:
• reserve the first 12 channels of the AI IOM/IOTA for classic two-wire transmitters, and
• use the last 4 channels of the IOM/IOTA to interface any of the supported input styles (including two-wire
transmitters).
Depending on the input style applied to channels 13 through 16, you may need to cut jumpers on the IOTA and
apply wiring to the TB2 terminal block on the IOTA. This is discussed in detail in the following sections.

The IOTA is pre-engineered (without custom wiring) to accept sources that are not two-wire transmitters, but
you must use channels 13 through 16.
When sources other than two-wire transmitters are to be interfaced and you have more than 4 per IOTAs, then:
• the first four must be interfaced to channels 13 through 16, and
• the remainder may be able to interface to channels 1 through 12 (depending on input style) but you must
perform some degree of custom wiring.

Custom wiring means:
• using additional wires to TB2 (beyond their intended purpose for channels 13 through 16)
• and/or using wires to another termination area in the cabinet engineered on a project-basis.
Some of the styles (other than two-wire transmitter):
• can be applied to channels 1 through 12 with the use of custom wiring.
• Other cannot be applied to channels 1 through 12 at all.