1756-OF8HK HART Analog Output Module Allen Bradley

Description

Overview

Essential details：1756-OF8HK HART Analog Output Module Allen Bradley

Products Description

• Simplified loop check —
This module allows you to work on all remote workstations Analog data and digital data of HART equipment Data is configured and monitored. You only have to go through one bit To view all data for a single channel.
• Simplified architecture —
Field devices can be directly connected to these I/O modules Even, thus eliminating the additional HART multiplexing Device and save installation costs.
• Simplify data management – This module has a variety of features to choose from, such as Fan Circumference, time stamp and filter frequency, etc. The module is also Suitable for control and asset simulation volume data and management Application. characteristic
• HART primary value (PV), secondary value (SV), third value (TV) and fourth value (FV) can be directly applied to control The application acts as the controller label.
• HART version 5, 6 and 7 read/write functionality
• Support mainstream asset management software
• Device Type Manager (DTM) is available Asset Manager software is used together
• Coated versions are available to protect against harsh conditions
Provide protection in the environment

1756-OF8HK

Take these precautions with CompactFlash cards:
1. Put the keyswitch in the PROG position before you insert a card. Do this for any card except one that you know is blank. Suppose you insert a card that already has a project that is configured to load on power up. If a power cycle happens before you store another project, the card loads the earlier project and firmware into the controller. It’s also possible that the controller starts running the project.
2. Make sure that you hold the CompactFlash latch to the left before you remove the card. If you push the eject button without moving the latch out of the way, it’s possible to damage the CompactFlash socket.

This controller also comes with integrated motion as it supports SERCOS interface, analog motion sensors and motion control over Ethernet I/P. When programming this controller, applicable programming languages include relay ladder, structured text, function block diagram, and sequential function chart.

This controller is capable of handling 32 controller tasks, with 100 programs per task while event tasks accept all event triggers. This controller comes with 8MB user memory and I/O memory of 0.98 MB. It is also equipped with energy storage technology, eliminating use of battery for retaining contents of the volatile memory.

The 1756-L73 can use up to 8 MB of user memory with 0.98 MB of Input/Output memory. In addition, it has 128,000 total and digital I/O and 4000 analog I/O at most. The required current draw at 1.2V DC is 5 mA and 800 mA current draw is required at 5.1V DC. The 1756-L73 has 2.5 W power dissipation and 8.5 BTU/hour thermal dissipation. The isolation voltage is continuous at 30 V with basic insulation, tested at 500V AC for 60 seconds. Using a USB 2.0, it can reach up to 12 Mbps at its full speed. Approximately, it only weighs 0.25 kg with a 1-slot width and an open-style enclosure.

The module is chassis-based at any slot for the 1756 chassis series. The 1756-L73 controller’s power requirement is a standard 1756 power supply. Its wiring category is 3 on USB ports. The 1756-L73 controller has an operating temperature of 0-60 deg. Celsius and its non-operating temperature is -40-85 °. Celsius. The maximum surrounding temperature that it can operate at is 60°. Celsius with 5 – 95% non-condensing relative humidity. Its operating vibration is 10 – 500 Hz is 2 g and its operating shock is 30 g operating shock while its non-operating shock is 50 g. It can reach 45 g when an SD card was installed.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Shipping

Superiority products 1756-OF8HK HART Analog Output Module Allen Bradley