XVS-440-10MPI-1-1U  XVS400 5.7″/8.4″ MICRO PANEL

Device names
XVS400 5.7″18.4″ and S2 5.7″ are two different names of equivalent products.
Function
MICRO PANELS XVS400 5.7″18.4″, MS2 5.7″ can be used as HMl devices or as integrated HMl/PLCdevices.
Intended use
MICRO PANELS XVS400 5.7″/8.4″; MS2 5.7″ are primarily used in machine and system building. Theyare designed exclusively for the visualization, operation and control of machines and systems. Anyother use must be agreed beforehand with the manufacturer.

A nameplate is fixed on the rear of the device in order to identify it. The nameplate contains the followinginformation:Manufacturer addressType designationPower supply requiredPart no. (Part-No or Art.-No)Serial no.Time of manufacturing (week/year)Approval mark and information to the approval
Arrangement of interfaces and operating elementsPermissible mounting options (top edge *Top»)
To ensure fast and optimum support always provide the support personnel with the following infomma.tion on the nameplate:
Part no. (Part-No or Art.-No)
Serial no.

Requirements for proper operation
The following points must be observed so that the device meets the contractual requirements:
 Only qualified personnel may work with the device.
 These persons must have read the Operating Instructions and must observe the requirements described.
 The ambient conditions stated must be observed. See Chapter 9.9 Ambient conditions,  60.
 The maintenance work must be carried out correctly.
 Potentially explosive atmosphere, Zone 22:
The ground resistance of accessible metal parts must be less than 109 ohms.
No liability is accepted for damage, consequential damage and accidents caused by the following:
 Failure to observe work safety regulations
 Failure or malfunction of the device
 Improper handling or use
 Failure to observe the Operating Instructions
 Conversions, modifications and repairs to the device

XVS-440-57MPI-1-1A0