VMIVME-1128 128-bit High-Voltage Digital Input Board with Built-in-Test VMIC

Description

Overview

Essential details：VMIVME-1128 128-bit High-Voltage Digital Input Board with Built-in-Test VMIC

• 128 bits of high-voltage digital inputs
• Each group of eight inputs is jumper selectable to monitor voltage source or current sinking signals
• Open circuit provides logic zero or (jumper-selectable) logic one
• On-board Built-in-Test logic for fault detection and isolation
• Front panel with fail LED
• User-selectable input voltage thresholds (0.61 to 34 V) with inputs of 0 to 66 V (see Table 1)
• Complies with the VMEbus Specification Rev. C.1
• A24:A16:D32/D16/D08 (EO): slave: 39/3D:29/2D
• Double Eurocard form factor (6U)
• High reliability DIN-type I/O connectors
• Compatible with VMIC’s Intelligent I/O Controllers (VMIVME-90xx series) and Universal I/O Controllers (VMIVME-9300 series)
Applications:
• Automatic Test Equipment
• Control System Inputs
• Data Acquisition Systems
• Digital Input Status Monitoring
• General Purpose Digital Inputs
• Low Maintenance Applications (BIT)
• Status Sensor Monitoring
• Supervisory Control Systems

VMIVME-1128

FUNCTIONAL CHARACTERISTICS
Compliance: This product complies with the VMEbus specification (ANSI/IEEE STD 1014-1987, IEC 821 and 297) with the following mnemonics: A24:A16:D32/D16/D08 (EO):
Slave: 39/3D:29/2D Form factor: 6U Input Connector Type: Two 96-pin female connectors are used with this board. For mass terminations (IDC), an ERNI IDC DIN connector and 0.033-inch 30 AWG ribbon cable are recommended. The ERNI order numbers are:
96-pin connector 913 031 96-conductor 0.033-inch cable 913 049
For discrete wire use, Harting connectors are recommended. This connector consists of a contact housing with female crimp-on contacts. Harting order numbers are:
96-pin connector 09 03 096 3214 Female crimp-on contacts 09 02 000 8484 Crimp tool (for stripped wire) 09 99 000 0075 Either connector needs a shell housing with holding levers. We recommend the Harting housing. Its order number is 09 03 096 0501. This shell is used with the discrete wire cable, latching the discrete wire cable to the board connector and providing a strain relief.
I/O Organization: Sixteen input ports, eight bits wide for a total of 128 inputs, addressable to any address within the short supervisory and/or short nonprivileged or the standard supervisory data and/or standard nonprivileged data I/O map.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Shipping

Superiority products VMIVME-1128 128-bit High-Voltage Digital Input Board with Built-in-Test VMIC