VM600 CPUM 200-595-031-111 modular CPU card Vibro-meter

Packing & Shipping

Package Type: New and original factory separately sealed inner box

Delivery time: Prepare delivery inventory;

The goods will be packed according to the international standard.

1. We will deliver the goods within 3 working days after payment.

2. The new and original factory seal the inner box separately

3. We can send it to you by DHL/TNT/UPS/EMS/ fedex.

Please contact us directly and we will deliver the goods according to your requirements. Best quality assurance

4. We promise that all goods we supply are 100% new and original

5. One year warranty (after delivery date).

Payment method: We accept telegraphic transfer

VM600 CPUM

The CPUM/IOCN card pair is used with a VM600 system rack (ABE04x) and a CPUM card can be used either alone or with an associated IOCN card as a card pair, depending on the application/system requirements.
The CPUM is a double-width card that occupies two VM600 rack slots (card positions) and the IOCN is a single-width card that occupies a single VM600 slot. The CPUM is installed in the front of the rack (slots 0 and 1) and an associated IOCN is installed in the rear of the rack in the slot directly behind the CPUM (slot 0). Each card connects directly to the rack’s backplane using two connectors.
The modular, highly versatile design of the CPUM means that all VM600 rack configuration, display and communications interfacing can be performed from a single card in a “networked” rack. The CPUM card acts as a “rack controller” and allows an Ethernet link to be established between the rack and a computer running one of the VM600 MPSx software packages (MPS1 or MPS2).
The CPUM front panel features an LCD display that shows information for the CPUM itself and for protection cards in a VM600 rack. The SLOT and OUT (output) keys on the CPUM front panel are used to select which signal to display. As a fieldbus communications interface for a VM600 monitoring system, the CPUM communicates with MPC4 and AMC8 cards via the VME bus and with XMx16/XIO16T card pairs via an Ethernet link in order to obtain measurement data and then share this information with third-party systems such as a DCS or PLC.
LEDs on the CPUM front panel indicate the OK, Alert (A) and Danger (D) status for the currently selected signal. When Slot 0 is selected, the LEDs indicate the overall status of the whole rack. When the DIAG (diagnostic) LED shows green continuously, the CPUM card is operating normally, and when the DIAG LED blinks, the CPUM card is operating normally but access to the CPUM card is restricted due to VM600 MPS rack (CPUM) security.
The ALARM RESET button on the front panel of the CPUM card can be used to clear the alarms latched by all protection cards (MPC4 and AMC8) in the rack. This is a rack-wide equivalent of resetting alarms individually for each card using discrete signal interface alarm reset (AR) inputs or VM600 MPSx software commands.
The CPUM card consists of a carrier board with two PC/104 type slots that can accept different PC/104 modules: a CPU module and an optional serial communications module. All CPUM cards are fitted with a CPU module that supports two Ethernet connections and two serial connections. That is, both the Ethernet redundant and serial redundant versions of the card.
The primary Ethernet connection is used for communication with the VM600 MPSx software via a network and for Modbus TCP or PROFINET communications. The secondary Ethernet connection is used for redundant Modbus TCP communications. The primary serial connection is used for communication with the VM600 MPSx software via a direct connection. The secondary serial connection is used for Modbus RTU communications.
Optionally, a CPUM card can be fitted with a serial communications module (in addition to the CPU module) in order to support additional serial connections. This is the serial redundant version of
the CPUM card.
The CPUM module’s primary Ethernet and serial connections are available via connectors (NET and RS232) on the front panel of the CPUM. However, if the associated IOCN card is used, the primary Ethernet connection can be routed to a connector (1) on the front panel of the IOCN (instead of the connector on the CPUM (NET)).
When the associated IOCN card is used, the secondary Ethernet and serial connections are available via connectors (2 and RS) on the front
panel of the IOCN.