1 Year Warranty
Description
Overview
Essential details：NAE5510-3 Network Automation Engine (NAE)
Product Description
The Network Automation Engine (NAE) and Network Integration Engine (NIE) are Web-enabled, Ethernet-based, supervisory devices that monitor and control networks of field-level building automation devices, HVAC equipment, and lighting. Figure 1 shows a typical NAE55 model.
This document describes how to install MS-NAE55xx-x and MS-NIE55xx-x model engines, which are referred to collectively as NAE55 unless specified otherwise.
Follow these guidelines when installing an NAE55:
• Transport the NAE55 in the original container to minimize vibration and shock damage to the NAE55.
• Verify that all the parts shipped with the NAE55.
The data protection battery and NAE55 ship together but are packaged separately
• Do not drop the NAE55 or subject it to physical shock.
• Do not open the NAE55 housing (except the data protection battery compartment). The NAE55 has no user-serviceable parts inside. Parts Included
• one NAE55
• one data protection battery
• one installation instructions sheet Materials and Special Tools Needed
• four fasteners appropriate for the mounting surface (M4 screws – Europe, #8 screws – North America)
• two 36 cm (14 in.) or longer pieces of DIN rail for DIN rail mount applications only
• a small straight blade screwdriver for securing communication wires in the terminal blocks
MS-NAE5510-3
lf you need to inquire or purchase ,please send the product models to my email or call medirectly .
sunny He
[Email] sales@saulcontrol.com
[Mobile] 86-18059884797
[WhatsApp] 86-18059884797
[Skype] sales@saulcontrol.com
NAE5510-3 Network Automation Engine (NAE)
Follow these guidelines when mounting an NAE55:
• Ensure that the mounting surface can support the NAE55 and any user-supplied enclosure.
• Mount the NAE55 in the proper orientation (Figure 4 and Figure 5).
• Mount the NAE55 on an even surface in wall mount applications whenever possible. If you must mount the NAE55 on an uneven surface, be careful not to crack the wall mount feet or housing when tightening the screws. Use shims or washers to mount the unit securely on the mounting surface.
• Mount the NAE55 in areas free of corrosive vapors and observe the environmental limitations listed in the Technical Specifications section.
• Do not mount the NAE55 on surfaces that are prone to vibration, such as duct work, or in areas where electromagnetic emissions from other devices or wiring can interfere with NAE55 communication.
• Allow sufficient space for running cable and wire and making terminal connections (Figure 2).
• Do not mount the power supply below the NAE55.
