IMMFP12 Multifunction Processor Module BAILEY

Description

Overview

Essential details：IMMFP12 Multifunction Processor Module BAILEY

Products Description

• Manufacturer : ABB

• Product No : IMMFP12

• Product type : Multifunction Processor Module

• Microprocessor : 32 bit processor (16 bit external bus) running at 16 MHz

• Memory Total : 512 kbytes ROM, 512 kbytes RAM, 256 kbytes NVRAM

• Power Requirements : +5 VDC @ 2 A; 10 W typical

• Serial Ports : Two RS-232-C ports, or one RS-485 and one RS-232-C port all of which link signals at a rate of up to 19.2 kbaud.

• Station Support : Sixty-four 40-kbaud serial stations (IISAC01) or eight 5-kbaud serial stations (NDCS03 or NDIS01).

• Redundant Communication Link Rate and Type : 1 Mbaud serial link.

• Electromagnetic/Radio Frequency Interference : Values not available at this time. Keep cabinet doors closed. Do not use communication equipment any closer than 2 meters from the cabinet.

• Programmability : C, BASIC, BATCH, ladder, function codes, and user-defined functions

• Mounting : Occupies one slot in a standard INFI 90 OPEN module mounting unit

• Ambient Temperature : 0° to 70°C (32° to 158°F)

• Relative Humidity : 5% to 95% up to 55°C (131°F)(noncondensing) 5% to 45% above 55°C (131°F)(noncondensing)

• Atmospheric Pressure : Sea level to 3 km (1.86 mi)

• Air Quality : Noncorrosive

• Certification : CSA certified for use as process control equipment in an ordinary (nonhazardous) location. Factory Mutual approved for use in Class I, Division 2, hazardous locations

• Dimensions (HxWxD), approx : 17.78cm x 3.55cm x 29.84cm

• Shipping weight : 1.5 Kg

IMMFP12

The IMMFP12 Multi-Function Processor Module (MFP) is one of the workhorses of the INFI 90® OPEN control module line. It is a multiple loop analog, sequential, batch and advanced controller that provides powerful solutions to process control problems. It also handles data acquisition and information processing requirements providing true peer-to-peer communications. The comprehensive set of function codes supported by this module handles even the most complex control strategies. The INFI 90 OPEN system uses a variety of analog and digital I/O modules to communicate with and control the process. The MFP module communicates with a maximum of 64 modules in any combination (refer to Figure 1-1).
The MFP module has three operating modes: execute, configure and error. In the execute mode, the MFP module executes control algorithms while constantly checking itself for errors. When an error is found, the front panel LEDs display an error code corresponding to the type of error found. In the configure mode, it is possible to edit existing or add new control algorithms. In this mode, the MFP module does not execute control algorithms.
If the MFP module finds an error while in execute mode, it automatically goes into error mode. Refer to the Section 4 of this instruction for operating mode details.
A one megabaud CPU to CPU communication link allows the MFP module to accommodate redundant processors. This link enables a backup MFP module to wait in a hot standby mode while the primary MFP module executes the control algorithms.
If the primary MFP module goes off-line for any reason, a bumpless transfer of control to the backup MFP module occurs

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Shipping

Superiority products IMMFP12 Multifunction Processor Module BAILEY