IC694MDL660 GE component module

Description

Overview

Essential details：IC694MDL660 GE component module

The IC694MDL660 is a component module of the PACSystem RX3i Programmable Automation Controller (PAC) family This module is originally produced by GE Intelligent Platform, now currently under Emerson Automation. This module is a high-density, Thirty-Two (32) point input channel with group isolation specifically, Four (4) input groups of Eight (8) channels each. The IC694MDL660 is designed to accept input signal voltage of 0-30 VDC with nominal input of 24 VDC along with an input current of 7.0 mA per point at rated voltage. Each channel of this module has an On-state voltage range of 11.5-30 VDC while the Off-state voltage is 0-5 VDC. The maximum On-state current is 3.2 mA while the maximum Off-state current is 1.1 mA. Configurable filter times may also be selected in order to fine-tune each input channel. The selectable input filters such as 0.5ms, 1.0ms, 2.0ms, 5ms, 10ms, 50ms, and 100ms enable the module to ignore false negative and false positive detection which are normally caused by environmental and mechanical factors such as dust and debounce. The selected filter settings become the On and Off response time of the input points. This module requires the use of high-density terminal blocks particularly Box-style with catalog number IC694TBB032 or Spring-style with catalog number IC694TBS032 front Terminal Block. Each input channel has dedicated input LED indicators that depict the logic state of the device. Logic 1 is depicted when the LED is illuminated indicating that the input channel is actively receiving input current otherwise, the LED is inactive.

IC694MDL660

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

IC694MDL660 GE component module

The IC694MDL660 input module is a logic input module that has been manufactured by GE Fanuc Automation and included in the RX3i PACSystem series. It is made to be used with the RX3i racks. This module comes with 32 inputs that can operate under positive or negative logic. These inputs are divided into different groups and each of them can operate at a maximum voltage of 30 Volts. The 4 groups of inputs each have their common connection. The isolation voltage rating between these groups goes up to 250 Volts AC continuous and up to 1500 Volts AC for 1 minute. The GE Fanuc Automation IC694MDL660 logic input module comes with a voltage of 24 Volts DC and each of the inputs operates with an input voltage range that goes from 0 to 30 Volts DC.

The GE Fanuc Automation IC694MDL660 logic input module comes with selectable input filter times that go from 0.5 milliseconds to 100 milliseconds. The on and off response times will be set after the users have established a filter time. The module has a power consumption of 300 milliamps, including all the inputs. The GE Fanuc Automation IC694MDL660 logic input module includes a diagnostics tool that consists of a terminal block that reports directly to the RX3i CPU. The module has a current of 7.0 milliamps per input at the rated voltage. One of the requirements for the correct application of this module is that it needs to be attached to an RX3i CPU that is release 2.90 or later. It must not be used with a Series 30-90 CPU since it is not compatible. The resolution of the module is 48 input bits and 16 output bits.