1 Year Warranty
Description
Overview
Essential details：IC693ALG222 GE 16-Channel Analog Voltage Input module
The IC693ALG222 is a 16-Channel Analog Voltage Input module for the GE Fanuc 90-30 Series. This PLC will give you 16 single-ended or 8 differential input channels. The Analog Input features easy-to-use configuration software for 2 input ranges: from -10 to +10 and 0 to 10 volt. This module converts the analog signals into digital signals. The IC693ALG222 receives two input signals which are unipolar and bipolar. The unipolar signal ranges from 0 to +10 V whereas bipolar signal ranges from -10V to +10V.This module can be set up in any of the I/O slots in a 90-30 Programmable control system. There will be connector block mounted on module for connecting to user devices.
The number of channels in the IC693ALG222 may be single ended (1 to 16 channel) or differential (1 to 8 channel). The power requirement for this module is 112mA from 5V bus, and also it requires 41V from 24V DC supply to power the converters. The two LED indicators indicate the status of user power supply the module’ status. These two LEDs are MODULE OK, which gives the status regarding power-up, and POWER SUPPLY OK, which checks whether the supply is above the minimum required level. The IC693ALG222 module is configured either using logic master programming software or via Handheld programming. If the user chooses to program the module via Handheld programming, he can only edit active channels, not active scanned channels. This module uses the %AI data table to record analog signals for the use of the programmable logic controller.
IC693ALG222
lf you need to inquire or purchase ,please send the product models to my email or call medirectly .
sunny He
[Email] sales@xiongbagk.cn
[Mobile] 86-18059884797
[WhatsApp] 86-18059884797
[Skype] sales@saulcontrol.com
IC693ALG222 GE 16-Channel Analog Voltage Input module
The catalog number IC693ALG222 is an order number for an analog voltage input module that has been designed and manufactured by GE Fanuc. It is made for the GE Fanuc Series 90-30 PLC systems. The GE Series 90-30 PLC systems support the installation of 4 to 51 modules like the IC693ALG222 input module and they are designed for high-end applications. The IC693ALG222 module provides both single-ended and differential input channels. The unit has 1 to 16 selectable single-ended input channels and 1 to 8 selectable differential input channels. Additionally, it should be noted that the update rate is 6 milliseconds for the single-ended channels and 3 milliseconds for the differential channels.
The IC693ALG222 input module has a common mode voltage of +/-11 Volts for the bipolar range and it has a cross-channel rejection of more than 80 decibels from DC to 1 kilohertz. Additionally, the unit has an input impedance of more than 500 kiloohms for operation on single-ended channels and an impedance more than 1 megaohm for operation on differential channels. The unit has a linearity of less than 1 LSC and a resolution at 0 to 10 Volts of 2.5 millivolts. In addition to that, the resolution at -10 to 10 Volts is 5 millivolts. The IC693ALG222 input module consumes 112 milliamps of current from the backplane +5 Volts DC bus voltage supply and 41 milliamps of current from the backplane isolated +24 Volts DC voltage supply. The unit has an input filter response of 41 Hertz for the single-ended mode and 82 Hertz for the differential mode. The IC693ALG222 input module has an input current rating of 0 to +10 Volts (unipolar) or -10 to +10 Volts (bipolar).
