IC693ALG221 analog current input module

The IC693ALG221 has input resolution of 12-bit with each input range having a resolution of 4 µA (1 LSB = 4 µA) for 4-20 mA input signal and 5 µA (1 LSB = 5 µA) for 0-20 mA input signal. It has an absolute accuracy of 0.1% full scale + 0.1% reading with common mode voltage of 200V. Additionally, this module has linearity of < 1 Least Significant Bit and input filter response of 325 Hz.

The IC693ALG221 default channel setting is 4-20 mA. When a 4-20 mA signal is received, the module internally converts the signal range to 0-32000, a unitless measurement representing the value of the input register. 0 corresponds to 4 mA while 32000 corresponds to 20 mA. Values in between is also represented within the register, with measurement point dictated by module’s resolution. This internal conversion also applies to 0-20 mA input range. Input signal type selected is hardware configured via shorting specific terminals in the module’s removable terminal block. To range jumpers are provided, one for channels one and two, and the other for channels three and four.

The IC693ALG221 4-Channel Analog Current Input Module is suitable to install in almost any I/O rack in a PLC system. In order to supply the operating voltage to the module, the voltage from the power supply is sent through regulator/inverter. Make sure to wire all the field connections by using graded, twisted cables for minimizing the noise and the capacitive loading. The isolated +24 Volts DC power which is supplied by the PLC is the main power source of the module. The IC693ALG221 4-Channel Analog Current Input Module offers electrical isolation as well as optical isolation between the field wiring and the backplane for eliminating externally generated noises. It is recommended to consider the total load requirements of the module as well as the load capacity of the power supply before configuring the module for the application.

IC693ALG221