Sale!

HE700GEN200  Horner APG uGENI VME Interface Module

Normally, a GE Fanuc programmable controller runs the network, through a PLC module called a Genius Bus Controller (GBC). The HE700GEN100/200 has the ability to replace or exist in conjunction with a Genius Bus Controller. Up to 32 devices are wired in a daisy chained fashion. Network devices support four communications terminals, Serial 1, Serial 2, Shield In and Shield Out. The network is terminated at each end with an appropriate terminating resistor. The value of the resistor should be chosen to match the characteristic impedance of the cable.

Categories: ,

Description

概观


Essential details:HE700GEN200  Horner APG uGENI VME Interface Module

Normally, a GE Fanuc programmable controller runs the network, through a PLC module called a Genius Bus Controller (GBC). The HE700GEN100/200 has the ability to replace or exist in conjunction with a Genius Bus Controller. Up to 32 devices are wired in a daisy chained fashion. Network devices support four communications terminals, Serial 1, Serial 2, Shield In and Shield Out. The network is terminated at each end with an appropriate terminating resistor. The value of the resistor should be chosen to match the characteristic impedance of the cable. Refer to GE Fanuc Automation publication GFK-90486 for help in selecting an appropriate cable type for your application. Note: If the characteristic impedance of the cable is unknown, 120 ohm terminating resistors should be used.

The I/O Address and Interrupt Vector Address in the short address space is determined by the Dip Switch 6 setting. The eight switches represent each of the eight bits in the upper two digits of the address. The lower two digits are always zero. The most common I/O addresses are; 1000H, 1800H, 2000H, 2800H, 3000H, 3800H, 4000H, 4800H and 5000H (See CPU documentation for detailed descriptions on available addresses). On the following page is a description of the Dip Switch settings. The Interrupt Vector Address is the address immediately following the I/O Address (I/O Address Base + 1).

HE700GEN200

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

sunny  He

[Email] sales@saulcontrol.com

[Mobile] 86-18059884797

[WhatsApp] 86-18059884797

[Skype] sales@saulcontrol.com

HE700GEN200  Horner APG uGENI VME Interface Module

The uGENI Address is determined by the Dip Switch 5 setting. The eight switches represent the eight bits in the upper two digits of the address. The lower four digits are always zero. The most common starting addresses are; 000000H, 020000H, 040000H, 060000H, 080000H, 0A0000H, 0C0000H, 0E0000H and 100000H (See CPU documentation for detailed descriptions on available addresses). Below is a description of the Dip Switch settings.

The configuration of the uGENI VME Interface module requires the joint operation of several devices.
The VME CPU has a required addressing scheme that must be followed and Genius must also be configured separately. The uGENI VME Interface module must be configured to operate properly in both environments.
Before configuring the Interface module, several items need to be determined. Below is a list of these items and the associated page number for the configuration setting.
1. A. Which AM codes does the VME CPU support? (Page 12)
B. Does the VME CPU support both USER and SUPERVISOR modes for AM code addressing? (Page 12)
2. Which addresses does the VME CPU support for Short Address space? (Page 13)
3. Which addresses does the VME CPU support for Standard Address space? (Page 13-14)
4. Does the VME CPU support VME Interrupts? (Page 14)
5. Which Interrupt levels does the VME CPU support? (Page 14)
6. Which Interrupt Vectors does the VME CPU support? (Page 13)
7. What is the Genius Bus Address for each uGENI? (Page 11)
8. What is the Genius baud rate for each uGENI? (Page 11)
9. Should each uGENI control outputs on start-up? (Page 11)
Once these items have been determined, the appropriate sections in chapter 2 can be used to determine the dip switch settings.

3500/25 149369-01  Keyphasor module 6SM57M-3.000  Synchronous Servomotors
3500/92 136180-01  Keyphasor module 05701-A-0282  Modbus Interface Module Kit RS422/485
1X00416H01  POWER SUPPLY  24V 300W & 25V 500W OUT DIN-RAIL MOUNT 3500/91 190782-01  EGD gateway module
5X00241G02  Ovation Westinghouse  Controller module 05701-A-0361  System 57 MODBUS Interface
489-P5-LO-A20  generator management relay 3500/65 145988-02  16-Channel Temperature Monitor
TRICON  3805E  TRICONEX  Analog Output Modules 3500/65  172103-01 16-Channel Temperature Monitor
5X00226G02  Ovation Westinghouse  Controller module 136188-02 Ethernet/RS485 Modbus I/O Module
MC-4/11/10/400  PowerDrive Motion Controller PCI-6733  Analog Output Device
2MLR-CPUH/T   MasterLogic  Programmable Logic Controller 3ASC25H209  DATX110   I/O board control module
KJ4002X1-BA1  Left 8 Wide Vertical Carrier CE4002S1T2B5  Standard I/O Termination Block
S72402-NANANA  S700  digital servo drive CE4005S2B4  Standard I/O Termination Block
SCYC55830 58063282A  Trigger plate PCI-4462  Sound and Vibration Device
IC697CMM742-DC  Ethernet Interface  Communications Modules TU890 3BSC690075R1  compact MTU for the S800 I/O
PPC322BE1 HIEE300900R1  Industrial drive function module KJ4001X1-BE1 12P0818X072 REV:L  8 Wide I/O Carrier with Shield Bar
VMIVME-3122  High-Performance 16-Bit Analog-to-Digital Converter (ADC) KJ2201X1-JA1  Redundant SLS Terminal Block
TVME200-10  6U VMEbus Carrier for up to 4 singlesize or 2 double-size IndustryPack (IP) modules AI895 3BSC690089R1  Analog Input Module
VMIVME-2540   Intelligent Counter/Controller AO2000 LS25  Advance Optima process analyzer’s modular
PPD513A24-110110  AC 800PEC Controller PCIE-6321  NI  Multifunction I/O Device
GFD563  AC 800PEC Controller CI627A 3BSE017457R1  AF100 communication interface
S-113N 3BHB018008R0001  Phase module 1900/65A-00-00-01-00-00  1900/65A General Purpose Equipment Monitor
S-093H 3BHB030478R0009  Phase module IS220PDOAH1A 336A4940CSP2  Discrete Output Pack
3BHE046836R0102 GFD563A102  AC 800PEC system excitation controller A6370D   Digital Overspeed Protection System
MVR1600-4601  Air Cooled Rectifier Module SLS1508  DeltaV SIS™ Logic Solver