EL900  Hardened 10/100BASE-TX to 100BASE-FX Media Converter

The EL900 Series provides media conversion between 10/100BASE-T and 100BASE-SX-LX Fiber. Built specifically for mission-critical applications in harsh environments, the EL900’s hardened design features high shock & vibration resistance, electrical noise immunity, wide operating temperature range from -40°C to 75°C, and ruggedized aluminum housing. With triple power inputs, link down alarming, Link-Fault-Pass-Through and a wide range of fiber connectivity options, the EL900 is the ideal media converter for harsh environments.
EtherWAN — “When Connectivity is Crucial.”

This hardened media converter provides an affordable solution for rugged and outdoor environment, transportation road-side cabinet, industrial floor shop, multitenant dwellings or Fiber To The Home (FTTH) applications. Capable of operating at temperature extremes of -40°C to +75°C, this is the media converter of choice for harsh environments constrained by space.
Plug-and-Play Solution:
The hardened media converter is a plug-and-play media converter in compact size. It doesn’t require any complicated software to set up.

Open the carton and unpack the items. Your package should include an EL900 media converter, an AC to DC power adaptor and cable (optional) and a Quick Install Guide. If items are missing or damaged, notify your EtherWAN representative.
Select Installation Location
Installation is DIN rail-mount, or wall mount (in an enclosure or industrial panel).
Ensure that the power source is within 6 feet (1.8 meters), and check that there is adequate airflow.
Place the media converter on the DIN rail from above using the slot. Push the front of the media converter toward the mounting surface until it audibly snaps into place.
Startup: Connect the supply voltage to start up the media converter via the terminal block.
Dismantling: Pull out the lower edge and then remove the media converter from the DIN rail.