Description
Overview
Essential details:DVSC-TT-14C-09 VISION DVSD-TA SERIES
lf you need to inquire or purchase ,please send the product models to my email or call medirectly .
sunny He
[Email] sales@xiongbagk.cn
[Mobile]Â 86-18059884797
[WhatsApp] 86-18059884797
[Skype] sales@saulcontrol.com
DVSC-TT-14C-09Â VISION DVSD-TA SERIES
6, the use of frequency converter to control the high-speed motor, due to the small reactance of the high-speed motor, will produce more high order harmonics. These high order harmonics will increase the output current value of the inverter. Therefore, when choosing a frequency converter for a high-speed motor, it should be slightly larger than that of an ordinary motor.
7. When the frequency converter is used for the variable pole motor, full attention should be paid to the selection of the capacity of the frequency converter so that its maximum rated current is below the rated output current of the frequency converter. In addition, when the pole number is converted in operation, the motor should be stopped first, otherwise the motor will be idled, and the inverter will be damaged.
8. When driving explosion-proof motors, the frequency converter has no explosion-proof structure, and the frequency converter should be set outside the dangerous place.
9. When the frequency converter is used to drive the gear reduction motor, the scope of use is restricted by the lubrication method of the gear rotating part. When lubricating oil is lubricated, there is no limit in the low speed range; In the high speed range above the rated speed, there is a risk of running out of lubricating oil. Therefore, do not exceed the maximum permissible speed.
10. When the inverter drives the winding rotor asynchronous motor, most of them use the existing motor. Compared with the ordinary squirrel cage motor, the winding impedance of the winding motor is smaller. Therefore, it is easy to occur due to the phenomenon of over-current tripping caused by ripple current, so a frequency converter with a slightly larger capacity than usual should be selected. Generally, the winding motor is mostly used for the flywheel torque GD2 is larger, and more attention should be paid to setting the acceleration and deceleration time.
11, when the inverter drives the synchronous motor, compared with the power frequency power supply, the output capacity will be reduced by 10% to 20%, and the continuous output current of the inverter is greater than the product of the rated current of the synchronous motor and the per unit value of the synchronous pull-in current.
12, for compressors, vibrators and other torque fluctuations large load and hydraulic pump peak load, if according to the rated current or power value of the motor to select the inverter, it may occur due to the peak current to overcurrent protection action phenomenon. Therefore, it is necessary to understand the power frequency operation and choose a frequency converter with a rated output current greater than its maximum current.
13, when the frequency converter drives the submersible pump motor, because the rated current of the submersible pump motor is larger than the rated current of the usual motor, the rated current is greater than the rated current of the submersible pump motor when the frequency converter is selected.
14, when the inverter controls the Roots fan or special fan, because the Roots fan is a volume blower, it has the characteristics of high output wind pressure. From the motor characteristics, its torque characteristics are approximately constant torque characteristics, and its starting current is very large, so when selecting the inverter, we must pay attention to whether the capacity of the inverter is large enough.
15, when selecting the inverter, we must pay attention to whether its protection level matches the situation on the site. Otherwise, the dust and water on the site will affect the long-term operation of the inverter.
16, single-phase motor is not suitable for inverter drive.
17, if the power supply of the inverter is a self-provided power supply, it is best to add an incoming reactor.
18, when the motor load is very light, even if the motor load current is within the rated current of the inverter, the inverter that is much smaller than the motor capacity cannot be used. This is because the reactance of the motor varies with the capacity of the motor, even if the motor load is the same, the greater the motor capacity, the greater the pulsating current value, so it is possible to exceed the current allowable value of the inverter.