60WKS-M240/22 Analog Servo Amplifier Series 60WKS KOLLMORGEN

Description

Overview

Essential details：60WKS-M240/22 Analog Servo Amplifier Series 60WKS KOLLMORGEN

Servo amplifiers are components which are intended to be incorporated into electrical machines and plant.
When the servo amplifiers are built into machines or plant, the intended operation is forbidden until it has been shown that the machine or plant fulfills the requirements of the EC Directive on Machines (89/392/EEC), the EC Directive on EMC (89/336/EEC) and the EC Low-Voltage Directive (73/23/EEC). EN 60204 and EN 292 must also be observed.
In connection with the Low-Voltage Directive 73/23/EEC, the harmonized standards of the EN 50178 series are applied to the servo amplifiers, together with EN 60439-1, EN 60146 and EN 60204.
The manufacturer of the plant or machine is responsible for ensuring that the plant or machine meets the limits which are laid down in the EMC regulations. Advice on the correct installation for EMC – such as shielding, grounding, filter arrangement, treatment of connectors and cable layout – can be found in this documentation.

Conformance to the following directives is mandatory for the supply of servo amplifiers within the European Community:
since 1 January 1996 : EC EMC Directive 89/336/EEC
since 1 January 1997 : EC Low-Voltage Directive 73/23/EEC
The servo amplifiers have been tested in an authorised testing laboratory, in a defined configuration with the components shown in Chapter II.
Any divergence from the assembly and installation described in the documentation means that you will be responsible for the performance of new measurements to ensure that the regulatory requirements are met.

60WKS-M240/22

The servo amplifiers are exclusively intended for driving brushless synchronous servo motors from the SM series under speed or torque control. The servo amplifiers are installed as components in electrical equipment or machines, and may only be operated as integral components of such equipment.
The 60WKS-M240/xx-PB series of servo amplifiers are supplied from the industrial 3-phase mains supply, via an isolating transformer. This isolating transformer must meet the specification in Chapter IV.1.
The servo amplifiers may only be operated in a closed steel switchgear cabinet, observing the ambient conditions defined in Chapter I.8.2. The notes on the ventilation of the servo amplifers are especially important.
The equipment must be plugged into a standard industrial 19″-casing (rack module) or into one of our compact housings, and connections must only be made via on of our module backplanes.
In accordance with the EC Directives on machines and the safety regulations, you must prepare a hazard analysis of the machine.

lf you need to inquire or purchase ,please send the product models to my email or call medirectly .

Shipping

Superiority products 60WKS-M240/22 Analog Servo Amplifier Series 60WKS KOLLMORGEN