1794-IF4I Allen-Bradley Flex IO analog input module

Its external DC power supply current is 80 mA at 24 Volts DC and its external DC power supply nominal voltage range is 19.2 to 31.2 Volts DC, including a 5% AC ripple. The 1794-IF4I has a current draw of 145 mA at 5.1 Volts and 125 mA at 24 Volts. It also has varying input current terminal ranges of 4 to 20 mA, 0 to 20 mA, and +/-20 mA, as well as varying input voltage terminal ranges of +/-10 Volts, 0 to 10 Volts, +/-5 Volts, and 0 to 5 Volts, all of which are user-configurable. The 1794-IF4I’s isolation voltage depends on what terminal base unit is installed to it. Its continuous isolation voltage is 120 Volts when using the 1794-TBT3S, 1794-TB3T, 1794-TB3S, 1794-TB3, and the 1794-TB2 base units. When using a 1794-TBN base unit, its continuous isolation voltage becomes 250 Volts. This module has an operating temperature of -20 to 55 degrees Celsius and a non-operating temperature of -40 to 85 degrees Celsius. Its maximum surrounding air temperature is 55 degrees Celsius and it has a non-condensing relative humidity of 5 to 95%. It has an operating vibration of 5 G, a non-operating shock of 50 G and an operating shock of 30 G.

The 1794-IF4I comes with individually isolated channels. It has an internal Sigma-Delta analog-to-digital converter (ADC) with update rate of 2.5 ms, 5.0 ms, and 7.5 ms. It has a resolution of 16 bits – unipolar; 15 bits plus sign – bipolar with specific values of 0.156 mV/cnt unipolar; 0.313 mV/cnt bipolar for Voltage signals and 0.320 ?A/cnt unipolar; 0.640 ?A/cnt bipolar for Current signals. Each channel has a step response of 1200 Hz conversion rate = 0.6 ms 600 Hz conversion rate = 6.7 ms 300 Hz conversion rate = 13.4 ms 150 Hz conversion rate = 26.7 ms. This module has an absolute accuracy of 0.1% full scale @ 25 °C 0.1% full scale @ 25 °C for both voltage and current terminal with accuracy drift of 0.0028% full scale/°C for Voltage and 0.0038% full scale/°C for Current.

The 1794-IF4I has built-in status LED indicator such as OK status indicator. This indicator is a bi-colored indicator that flashes green if the module is in power up reset condition, 24VDC power is off and module is in configuration mode. Red is displayed when the module fails the initial hardware test.