1 Year Warranty
Description
Overview
Essential details：1783-BMS10CGN Managed Ethernet switch
1783-BMS10CGN An Ethernet switch is a network device used to connect devices in a computer network. It can connect multiple devices into the same network and allow them to communicate with each other. Ethernet switches can be managed in the following ways:
1783-BMS10CGN Configure the switch: You can configure the switch using the console or network management tool, for example, set the IP address, VLAN, and port rate.
1783-BMS10CGN Monitoring switches: You can use the network management tool to monitor switch status, such as port status, bandwidth usage, and error logs.
Upgrade Switch firmware: The firmware of the switch can be upgraded through the network management tool to fix vulnerabilities or add new features.
Backup and restore Switch configurations: You can back up the configuration of the switch in case it is lost or needs to be restored to a previous configuration.
Security management: You can set access control lists (ACLs) and port security to enhance switch security.
In short, the management of Ethernet switches needs to understand the basic knowledge of switches and the use of network management tools to ensure the normal operation and security of the network.
1783-BMS10CA
lf you need to inquire or purchase ,please send the product models to my email or call medirectly .
sunny He
[Email] sales@saulcontrol.com
[Mobile] 86-18059884797
[WhatsApp] 86-18059884797
[Skype] sales@saulcontrol.com
1783-BMS10CGN Managed Ethernet switch
1783-BMS10CGN Configuring an Ethernet switch through the console requires connecting the computer to the console port of the switch using a console cable. You can then connect to the console of the switch using terminal emulator software such as PuTTY, Telnet, etc.
After connecting to the console of the switch, you can configure the switch using the command line interface (CLI). Different switch vendors may use different command line interfaces, but generally offer similar commands and functionality.
1783-BMS10CGN The following are some common Ethernet switch configuration commands:
View switch information: Run the show command to view switch information, such as version, port status, and VLAN information.
Configure an ip address: Run the interface command to enter a specific interface, and then run the ip address command to configure an IP address.
Create a VLAN: Run the vlan command to create a VLAN. Then run the interface vlan command to enter the VLAN interface and configure an IP address.
1783-BMS10CGN Configuring ports: Use the interface command to go to a specific port, and then use the port link-mode command to set the port mode, such as access or trunk. You can also use the port speed command to set the port rate.
Configuring link aggregation: You can use the link-aggregation command to create a link aggregation group and then add multiple ports to the aggregation group.
Configuring the spanning tree protocol: The spanning tree protocol can be configured using the spanning-tree command, such as enabling or disabling the spanning tree and setting the root bridge.
Note that when configuring an Ethernet switch, you need to carefully read the documentation and manuals of the switch to understand the specific commands and functions. At the same time, the switch should be configured carefully to ensure the stability and security of the network.
