Description
Overview
Essential details:130539-30 Interconnect Cable Bently Nevada
- Manufacturer : Bently Nevada
- Product No : 130539-30
- Product type : Interconnect Cables
- Made in U.S.A
- Cable Length Option in feet For the cables listed below, order in increments of 1.0 ft (305 mm) : 30 = 30ft
- 3-conductor shielded 18 AWG (1.0 mm2) cable with 3-socket plug and fluorosilicone elastomer boot at one end, terminal lugs at the other end. Minimum length of 2.0 ft (0.6 m), maximum length of 99 ft (30 m). A manual is available to assist with installation of this cable (part number 133080-01).
- Shipping Weight: 10 Kg
Sales Manager: Manager He
E-mail number: sales@saulcontrol.com
skypel wechat: +86-18059884797
Mobile phonelwechat: +86-18059884797
QQ:3095989363
Other :130539-30 Interconnect Cable Bently Nevada
ETP90 uses a piezo-resistive pressure sensor which is connected to the pressure of the media via a capillary tube and a diaphragm. Media pressure applied to the diaphragm is transferred via silicon oil to the pressure sensor. The oil completely fills the cavity in the sensor, the capillary tube and the cavity above the diaphragm. This means that the diaphragm movement is very small at pressure changes. The capillary tube protects the pressure sensor from transient pressure surges.
To ensure that the sensor has the correct reference pressure, the rear side is connected to ambient atmospheric pressure via a tube, designed in order that air passes “cold surfaces” closest to the pressure connection of the transmitter. Any humidity in the air will condense on these surfaces. The condensate flows out and the remaining air in the tube stays dry. Additionally, the reference pressure connection is designed to prevent flushing water from entering.
ETP90A has microcomputerbased electronics, which communicate with the outside world with a 4 to 20 mA signal and can be configured/calibrated by means of keys and switches in the connection space.