GE MAVS01L1AB0751D-140393N Solid-State Soft Starter

Parameter Name	Parameter Value & Description
Product Model	MAVS01L1AB0751D-140393N
Manufacturer	General Electric (GE)
Product Type	Medium-Voltage Solid-State Soft Starter
Rated System Voltage	Likely 7.2 kV (based on `L1`code). Must be verified against nameplate and manual.
Motor Full Load Current (FLC) Rating	751 Amps (based on `0751`code). This is the key sizing parameter.
Starting Method	Solid-State, Voltage Ramp (typical). Uses thyristors (SCRs) to control voltage.
Control Power	Typically requires a low-voltage AC or DC supply (e.g., 120V AC, 125V DC) for control circuits.

Add to quote

Description

Product Overview

The GE MAVS01L1AB0751D-140393N is a Medium-Voltage, Solid-State Soft Starter from General Electric’s (GE) MV Series, specifically designed for the controlled acceleration and deceleration of high-power three-phase AC induction motors. This device is engineered to manage the high inrush current associated with starting large motors by gradually ramping up the voltage applied to the motor terminals, thereby reducing mechanical stress on the motor, connected equipment (pumps, fans, compressors), and the electrical distribution system.

This soft starter replaces traditional electromechanical reduced-voltage starters (like auto-transformers or wye-delta starters), offering superior control, reliability, and reduced maintenance. It is typically installed between the medium-voltage circuit breaker and the motor.

Technical Specifications (Decoded from Model)

Parameter Name	Parameter Value & Description
Product Model	MAVS01L1AB0751D-140393N
Manufacturer	General Electric (GE)
Product Type	Medium-Voltage Solid-State Soft Starter
Rated System Voltage	Likely 7.2 kV (based on `L1`code). Must be verified against nameplate and manual.
Motor Full Load Current (FLC) Rating	751 Amps (based on `0751`code). This is the key sizing parameter.
Starting Method	Solid-State, Voltage Ramp (typical). Uses thyristors (SCRs) to control voltage.
Control Power	Typically requires a low-voltage AC or DC supply (e.g., 120V AC, 125V DC) for control circuits.
Control Features	Adjustable Start Voltage, Ramp Time, Current Limit, Soft Stop/Deceleration. Advanced units may include Pump Control (to reduce water hammer) and Torque Control.
Protection Features	Integrated motor protection often includes: Overload, Overcurrent, Phase Unbalance/Loss, Undercurrent, Excessive Starts, Thyristor Over-temperature, and Ground Fault.
Bypass Contactor	Most MV soft starters include an integrated bypass contactor. Once the motor reaches full speed, the contactor closes, shunting current around the SCRs to eliminate heat losses and increase efficiency/reliability.
Communication	Typically includes serial communication (Modbus RTU) and hardwired I/O for integration into DCS/PLC systems. May have optional Ethernet or other fieldbus cards.
Enclosure	Freestanding, metallic cabinet. Rating depends on `B`code (likely NEMA 1 for indoor or NEMA 3R for outdoor).
Cooling	Forced air cooling with fans. Air intake filters require regular maintenance.

MAVS01L1AB0751D

Main Features and Advantages

Eliminates High Inrush Current, Protecting Electrical Infrastructure: The primary benefit is the dramatic reduction of motor starting current (often limited to 300-400% FLC vs. 600-800% for direct-on-line starting). This minimizes voltage dips on the plant’s electrical bus, preventing disturbances to other sensitive equipment and complying with utility requirements.

Reduces Mechanical Stress, Extending Equipment Life: By providing a smooth, controlled acceleration torque, the soft starter significantly reduces torsional stresses on motor shafts, couplings, gearboxes, and driven equipment (like pump impellers or fan blades). This leads to fewer mechanical failures, less maintenance, and longer asset life.

Integrated Intelligent Protection and Diagnostics: Modern GE MV soft starters incorporate comprehensive microprocessor-based protection for the motor, surpassing the capabilities of traditional overload relays. They provide detailed diagnostics, event logging, and communication for predictive maintenance and quick fault identification.

Application Fields

The GE MAVS01L1AB0751D is used for starting large motors in heavy industries where uncontrolled starts are costly or damaging.

Water & Wastewater: Large raw water, transfer, and wastewater pumps.
Mining & Minerals: Crushers, conveyors, ball mills, and large slurry pumps.
Oil & Gas: Pipeline pumps, water injection pumps, gas compressor motors.
Power Generation: Induced Draft (ID) and Forced Draft (FD) fans, boiler feed pumps, circulating water pumps.
Chemical & Petrochemical: Large process pumps and compressors.

Essentially, it is applied to any medium-voltage motor (typically 4160V, 6.6kV, 11kV) in the 500-3000 kW range where controlled starting is essential.